Performance Series
Using the Performance Series Intercom
© 3M 2002
7
- Press a key to select a starting number.
- Use the Left/Right Arrow keys to find the desired
Call Station.
3. Proceed as described under Steps 2 through 4 under the
previous section One Call Station Calling Station Selector.
All Call Mode
The All Call mode allows the attendant to speak to all Call Stations
at once. All Call mode can be entered at any time. To use All Call
mode:
1. Hold the ALL CALL key down.
The display shows ALL CALL and TLK.
2. Talk into the microphone.
3. Release the ALL CALL key.
The system goes to the Standby mode or to the previous call
connection.
: :TLK
ALL CALL
To Next Page
Loading...
