3M Performance Series User Manual

Using the Performance Series Intercom
Performance Series
3M 2002
8
Paging to another Station Selector
There are two ways to page from one Station Selector to another
Station Selector:
• Enter a specific Station Selector number.
• Use directory assistance.
To page by entering a Station Selector number:
1. Press the keys associated with the Station Selector
being paged (Station Selectors are designated 71
through 85).
2. Press TALK
Display shows the Station Selector number being paged.
If no response from the paged Station Selector in 30 seconds,
system returns to Standby.
To page by using the directory assistance:
Directory assistance allows searching for a Station Selector or Call
Station by name. The system must be in the Standby mode. To use
directory assistance:
1. From the Standby mode, press the MENU/0 key.
The display shows S = 01 and the station 1 name.
2. Press the left arrow key until the desired Station
Selector number appears in the display (Station
Selectors 1 through 15 are designated 71 through 85).
3. Press TALK
Display shows the Station Selector number being paged.
If no response from the paged Station Selector in 30 seconds,
system returns to Standby.
Responding to a Page from another
Station Selector
To respond to a page request:
1. Press TALK
Display shows the Station Selector number paging.
Speaker produces a distinctive alert tone.
or
Press STD BY to ignore page request.
2. Press STD BY when finished talking.
3. Proceed as described under Steps 2 through 4 under the
previous section One Call Station Calling Station
Selector.
: :SBY
S=72:SELECTOR 02
::
:..PAGING...
PAGE:REQUEST:SBY
S=71:SELECTOR 01
PAGE:REQUEST:SBY
:..PAGING...
: :SBY
S=72:SELECTOR 02
::
:..PAGING...

3M Performance Series Specifications

General

Brand	3M
Model	Performance Series
Category	Intercom System
Language	English