3M™ PROTÉGÉ PLUS
PORTABLE MULTI-GAS MONITOR
SPECIFICATIONS
8006569, Rev. C/June 2019 A-1
APPENDIX A. SPECIFICATIONS
Table A-1: Monitor Specifications
Category Specifications
Nominal
Voltage
3.7VDC
Battery
Lithium Ion - rechargeable 5 hour charge time
Alkaline - non-rechargeable 3 AAA batteries
Lithium Ion
Battery Life
Cat Bead (traditional) Sensor
27 hour runtime minimum, without pump, no
alarm
19 hour runtime minimum with pump
Cat Bead (low power) Sensor
40 hour runtime minimum, without pump, no
alarm
25 hour runtime minimum with pump
Alarms Visual, vibrating, audible @93 dB
Data Log
For 4 sensors 3 months at maximum rate of 10 second intervals
Intervals can be configured from 10- 600 seconds
Datalogging can also be event based and all events recorded during 90 day
period
Housing TPE (Thermoplastic Elastomer)
Dimensions 4.6”H X 2.8”W X 1.4”D (116mm X 72mm X 36mm)
Weight 10.8 oz. (306g) without pump
Operating
Temperature
Range -
Normal
-4°F to +131°F (-20°C to +53°C) continuous long-term operation
For values outside this temperature range, you may experience reduced perfor-
mance or alarm functionality.
Operating
Humidity
0% to 95% RH, non-condensing
Ingress
Protection
IP 65/67 Compliant
NOTE: These values are factory defaults and may be changed.