3M SCOTT Vision C5 Operating & Maintenance Instructions

P/N 595390-01 Rev B 202003 11
P/N 595390-01
202003
Rev B
CHAPTER 1
INTRODUCTION
This chapter describes the 3M Scott Vision C5 full facepiece and its major components.
Before You Begin
Carefully read “Safety Information” on page 7 before beginning any of the procedures in this manual.
Overview
The Vision C5 full facepiece provides respiratory protection to an individual when entering, working in, or exiting an
objectionable, oxygen-deficient, or unbreathable (toxic) atmosphere. This equipment is designed to withstand
exposure to certain environmental conditions as defined by the applicable approvals.
Facepiece Components
The Vision C5 facepiece consists of the components shown in Figure 1-1.
Figure 1-1 3M Scott Vision C5 full facepiece
Head Harness
Nose cup with
inhalation valves
Lens
(Fenestra)
Regulator Docking Port
Voicemitter
Lens Frame
(Bezel)

3M SCOTT Vision C5 Specifications

General

Brand	3M
Model	SCOTT Vision C5
Category	Safety Equipment
Language	English