3M SD-200 User Manual

1 SD-200 Overview
SD-200 Overview
The SD-200 is intended to provide measurements of sound pressure levels in air.
With five easy-to-use keys, the keypad is used for powering on/off, viewing and/or
running measurements, navigating, and setting parameters. (See Table 1-2 for
more information.)
 Note: for typical sound measurements when determining hearing protection,
the SD-200 may be set to “A weighting” with “Slow” response.
Figure 1-1: SD-200 overview
Display
View measurements and screen indicators
Screen indicators
The screen indicators identify
settings and values
On/Off key
Powers the SD-200 On/Off
A/C frequency
weighting key
Press to select
A or C frequency
weighting
Microphone with an attached windscreen
Fast/Slow time response key
Press to select fast or slow
time response
Mode key
Cycles through the measurements
and Run-Time screens
Run & Stop key
Runs and stops
integrating
measurements over the
Run-Time
LEDs
Used in the LED alert measurement screen

3M SD-200 Specifications

General

Brand	3M
Model	SD-200
Category	Measuring Instruments
Language	English