Unpacking
We carefully packaged your printer , to protect it from rough handling usually involved with
international freight. Therefore, if despite our efforts, you are being delivered a damaged package
you should always refuse delivery or put your remarks on the delivery bill.
Package (palletized) usually consist of:
• Printer
• Print tray
• AC power cable
• USB cable
• print area door keys
• 3mm ABS spoolh
• 3mm HIPS spool
• purchased options
To unpack machine never use cutters that could pierce packaging and damage content. Please
follow the procedure:
1. Remove plastic straps, using scissors. Should the printer arrive inside a wooden box,
don't use crowbars to open: use a screwdriver to remove cover and side panels
2. Remove cover
3. Remove packaging foam/bubbles: don't use cutter blades!
4. Remove packaging side panels
5. If a pedestal has been delivered, assemble it taking care to tighten ALL the bolts.
6. If you didn't buy a pedestal, be sure that the printer will be placed on a sturdy enough
surface
7
To Next Page
Loading...
