4iiii precision pro - 3. Pairing Your Powermeter; 3.1 Pairing with ANT+ Displays

2.4.1 Configuring as a dual-sided powermeter
If you have unlinked your PRECISION PRO, you will need to re-link in order to use it
as a dual-sided powermeter:
1. Spin the crank arms four times to wake your powermeter
2. Open the 4iiii app on your smartphone
3. Tap on the menu and select PRECISION Configuration
4. Select your powermeter from the list
5. Select Dual Sided when prompted
6. Select your other powermeter to link
7. On the next screen, wait up to one minute for the left borders of the
information panes to turn green
Quick Tip: If the left borders of the information panes are red, the powermeter is not
paired to the app, see Section 7.4
2
GETTING STARTED
9
Table of Contents