Your powermeter should be cared for properly. Follow these guidelines:
• Store your powermeter between temperatures of -20°C (68°F)
and 50°C (122°F)
• Do not allow water or other liquids to enter the battery compartment
• Avoid using abrasive materials when cleaning your powermeter
• Only use water or mild soap to clean your crank
• Do not expose your powermeter to degreasers or corrosive cleaning agents
• To ensure a watertight seal, keep the o-rings on the battery cap lubricated with
silicone grease and replace any o-rings that appear worn or damaged
Quick Tip: Replacement battery covers and o-rings are available at our online store.
6
MAINTENANCE AND CARE
22
Table of Contents
To Next Page
Loading...