1. Introduction
1.1 What’s in the box 1
2. Getting Started
2.1 Installation 2
2.2 Preparing for your ride 3
2.3 Installing and replacing batteries 4
2.3.1 Non-drive-side powermeter 5
2.3.2 Drive-side powermeters for Dura-Ace FC-9000 6
2.3.3 Drive-side powermeters for FC-Mxxxx (XT/XTR series) 7
2.4 Configuring your powermeter using the 4iiii App 8
2.4.1 Configuring in single-sided mode 9
2.4.2 Configuring as a dual-sided powermeter 10
2.4.3 Unlinking your dual-sided powermeter 11
3. Pairing
3.1. Pairing with ANT+ enabled displays 12
3.2. Pairing with Bluetooth Smart 14
TABLE OF CONTENTS
To Next Page
Loading...