4iiii precision pro - 3.2 Pairing with Bluetooth Smart Devices

2.4.3 Configuring in single-sided mode
To unlink your PRECISION PRO, you will need:
• The 4iiii App
• A data connection (cellular or WiFi)
• Bluetooth Smart enabled on your smartphone
Follow these steps to unlink your PRECISION PRO:
1. Spin the crank arms four times to wake your powermeter
2. Open the 4iiii App on your smartphone
3. Tap on the menu and select PRECISION Configuration
4. Select your PRECISION PRO from the list of powermeters
5. Tap on the unlink button to unlink the two sides
Quick Tip: If your powermeter does not appear in the list, check that it is
disconnected from all other Bluetooth Smart devices, and that both batteries have
sufficient charge.
2
GETTING STARTED
11
Table of Contents