5.3 Using third-party compatibility
mode on Bluetooth Smart
By default your powermeter adheres to the
Bluetooth Smart standard and transmits power
data from each leg to a Bluetooth Smart display
unit independently. Some Bluetooth Smart
display units and apps do not support this.
You can enable third-party compatibility mode
through the 4iiii App. With this option enabled
your powermeter will combine the power data
from both legs for the display unit or app.
To enable third-party compatibility mode,
follow these steps:
1. Spin the crank arms four times to
wake your powermeter
2. Open the 4iiii App
3. Tap on the menu and select PRECISION
Configuration
4. Select your powermeter from the list
5. Once the left edge of the PRECISION info
pane turns green for both sides, swipe
across the toggle to enable 3rd Party Apps.
5
ADVANCED FEATURES
21
Table of Contents
To Next Page
Loading...