3.2 Pairing with Bluetooth Smart
Pairing procedures vary widely between Bluetooth Smart display units. Please
consult the manufacturer’s instructions to pair your PRECISION PRO. Following are
instructions for pairing using the 4iiii App.
1. Spin the crank arms four times to wake your powermeter
2. Open the 4iiii App on your smartphone
3. Tap on the menu and select PRECISION Configuration
4. Select your PRECISION PRO from the list of powermeters
5. If your PRECISION PRO is configured as a dual-sided powermeter, continue to
Step 6; otherwise, select Single Sided
6. Once the left edge of the PRECISION info pane turns green, tap on the menu and
select Workout
Quick Tip: If your powermeter does not appear in the list, check that it is disconnected
from all other Bluetooth Smart devices, and that Bluetooth is enabled on your phone.
Also, ensure both batteries on your powermeter have sufficient charge.
3
PAIRING
14
Table of Contents
To Next Page
Loading...