the Product under any specification other than, or in
addition to, the specifications set forth in 4iiii’s relevant
User’s Manual and Specifications; (4) damage caused
by accident or natural events such as lightning (or other
electrical discharge) or fresh/salt water immersion
of Product; (5) damage occurring in transit; or (6)
normal wear and tear. 4iiii IS NOT RESPONSIBLE for (1)
aesthetic or structural damage to the end purchaser’s
crank resulting from installation or removal of the
Product, or (2) damages incurred to the end purchaser’s
crank when the Product is sent in for warranty, service
and/or replacement of the Product.
Warranty service
To obtain warranty service, the end purchaser must
send his/her crank along with the Product and must
contact 4iiii for shipping instructions and an RMA
tracking number. Return the Product, freight prepaid,
along with the original sales receipt as a required
proof of purchase for warranty repairs, with the
RMA tracking number written on the outside of the
package and ship to 4iiii. In the event of a Product
failure for which warranty is claimed where the point
of sale was through a 4iiii authorized dealer and/or
distributor, such authorized dealer and/or distributor
will perform an assessment of the Product, follow
the 4iiii authorized removal procedure and be the
contact with 4iiii while providing the end purchaser
with a replacement product. VOIDING WARRANTY.
This Limited Warranty shall be null and void if: (1) the
Product is repaired or serviced by anyone other than
an authorized 4iiii representative; (2) the Product is
installed on any non-compatible crank including, but
not limited to, a carbon crank; or (3) the Product is
exposed to external heat sources that expose Product
to temperatures in excess of storage and operating
specifications.
9
WARRANTY
29
Table of Contents
To Next Page
Loading...
