GLUCOFIX
®
TECH - 51415 - 02/20
UK
14
3. BEFORE TESTING
●
Do not connect the data cable to the data transfer port during testing. The meter may be
damaged, leading to inaccurate test results.
● Do not apply blood directly to the test strip port on the meter.
● Do not share your meter with anyone else to avoid the risk of infection.
●
The meter complies with applicable electromagnetic emission requirements (EMC). However,
do not perform a glucose measurement with this meter near mobile devices or electrical or
electronical equipments that are sources of electromagnetic radiation, as these may interfere with
the proper operation of the meter.
To Next Page
Loading...
