A.MENARINI GLUCOFIX TECH - Page 29

GLUCOFIX
®
TECH - 51415 - 02/20
UK
29
6. METER SETUP
CAUTION
● Before setting the alarms please check that the time is properly set.
a. The display will show the alarm clock and the “Glu” icons, both blinking. Press or . to scroll
between glucose (“Glu” icon blinking) and β-Ketone (“Ket” icon blinking) alarm section. Press
to conrm the selection and move on to the next step. In the following steps either “Glu” or “Ket”
icon will be shown, indicating the selected alarm section.
b. The display will show alarm 1 status (the default setting is OFF). You can turn it on by pressing
or to select the hour. Press to conrm the selection and move on to the next step.
c. Press or to select the hour. Press conrm the selection and move on to the next step.
d. Press or to select the minutes. Press to conrm the selection and move on to the alarm
2 setting.
e. Set alarm 2 and 3 by following steps b to d. After you have nished setting all alarms, press to
return to the setting menus (step c §6).
NOTE
● The alarm will have the format (12H, 24H) set for the time.
● Alarm settings will not be erased when changing the batteries.