The cursor moves to START.
Confirm with [ENTER].
The extra period has been programmed.
Note
Once the extra period has completed running, the controller returns to the mode ON, OFF
or WEEK PROGRAM. The following week, the extra period will NOT be automatically
switched back on.
4.3.10 Settings
Using the option SETTINGS you can adjust certain settings, and display certain water
heater specifications:
Adjustable settings
Menu language.
Current day of week and time.
Displayable water heater specifications, this category is only relevant to the
installation engineer and/or service and maintenance engineer
Regulation interval (water temperature).
Ignition speed of fan.
Working speed of fan.
4.3.10.1 Setting menu language
To set menu language:
Call up the menu for selecting the language as follows:
[ ]: SETTINGS.
Confirm with [ENTER].
The display shows the menu for settings.
The cursor is positioned beside LANGUAGE.
Confirm with [ENTER].
The display shows the language selection menu.
Scroll with [ ] to the desired language.
Confirm with [ENTER].
The language is set.
10.
n
•
-
-
•
-
-
-
1.
2.
3.
4.
38 User part
To Next Page
Loading...
Need help?
General
