A.O. Smith BTR 118 SERIES - POWER VENT KITS FOR SIDEWALL VENTING

5
Servicing should only be performed by a Qualied Service Technician
POWER VENT KITS FOR SIDEWALL VENTING
BTR water heaters can be used with power
vent kits for sidewall venting. A. O. Smith
offers power vent kits for use on installations
with a maximum of 100 equivalent feet
of vent piping. The power vent kits also
use type B vent materials. When power
venting, specic exterior clearances must be
maintained, as outlined in the National Fuel
Gas Code. (NFPA 54, ANSI A223.1, sec 7.8)