T-H2-DV/T-H2-OS Service Manual
Ver. 1.01
55
12. Controls and settings
12-1.
(A) Diagnosis using the computer board…………………………………………………………………………....
(B) Diagnosis using the TM-RE30……………………………………………….……………………………..………..
Verifing functionality of computer board, Displaying error code history, and Clearing error
code history memory…................................................................................................………...
Clearing the “101” and “991” error code……………………………………………………………………………
AFR rod function…………………………………………………………………………………………………………………
Dipswitch settings….…………………………………………………………………………………………………………..
Assigning unit numbers in the Easy-link system………………………………………………………………….
(A) ON/OFF conditions: Overview………………….………………………………………………………………..
(B) ON/OFF conditions: BTU requirements………………………………………………………………………
(A) Pump control ON/OFF conditions (Only for single and Easy-link system)…………………..… 71
12-8.
(B) Pump control ON/OFF conditions: BTU requirements…………………………………………………..
Multi-unit system ON/OFF conditions……………….……………………………………………………………….
Operation time for unit rotation………………………..………….………………….……………………………..…
Individual unit operation in easy-link system while parent unit is under abnormal
conditions (Individual operation mode)………………………………………………………….………………….
High Altitude Region Support Software (FM+, FM++ and FM+++)…....………………….……………
75
76
12-13.
How to convert unit of set temperature.…………………………………………………………………………….
Control for exhaust temperature (T-H2-DV only)……..……………………………………………..………….
Relay selection for the pump control connection……………………………………………………………….
Alarm port terminal……………………………………………………………………………………………………………
Adjusting manifold gas pressure………………………………………………………………………………………...
Manually adjusting the fan motor speed………………………………………………………………………….…
Freeze protection system…………………………………………………………………………………………………...
Freeze protection for recirculation systems…………………...………………………………………………….
Draining the unit and cleaning the inlet water filter…….……………………………………………………..