A&D AD-8923-BCD User Manual

12
4. FUNCTION SETTING
Function setting specifies the AD-8923-BCD performance. The parameters are stored in non-volatile
memory, and are maintained even if the power line or AC adapter is removed.
The function setting menu consists of two layers. The first layer is the “Class” and the second layer is the
“Item”. Each item stores a parameter.
Press the SAMPLE key to select an item and press the RE-ZERO key to change the parameter.
Then, press the PRINT key to store the new parameter.
Example
This example sets “Baud rate” to “9600 bps”.
Note
The AD-8923-BCD may not function properly, depending on the settings and operating
environment. Check the settings and change them as necessary.
While holding
down
Item
Class
Item
"Baud rate"
Parameter
"9600 bps"
Press twice
press
END
START

A&D AD-8923-BCD Specifications

General

Brand	A&D
Model	AD-8923-BCD
Category	Remote Control
Language	English