A&D AD-8923-BCD User Manual

19
6.2. Fixing of the Decimal Point Position
The AD-8923-BCD can set the display digit and the BCD output digit by setting of the function.
When fixing the decimal point position, the BCD output digit does not change if changing the minimum
display digit by pressing the SAMPLE key.
Example 1) When not fixing the decimal point position. ( )
[Factory setting]
Key
Balance output
AD-8923-BCD display
BCD output
00012346
00123456
Note
: space 20h
When changing the minimum display digit by pressing SAMPLE key, the BCD shifts the
output left and adds the last digit.
Example 2) When fixing the decimal point at the third digit position. ( )
Key
Balance output
AD-8923-BCD display
BCD output
00123460
00123456
Note
: space 20h
When changing the minimum display digit by pressing the SAMPLE key, the BCD output
does not change the number of digits.
If the balance outputs RS-232C weighing data that exceeds six digits, the AD-8923-BCD does
not display the high-end digits. (The BCD data is output.)
STABLE
FAST
MID.
RESPONSE
SLOW
STABLE
FAST
M
ID
.
RESPONS
E
SLOW
STABLE
FAST
MID.
RESPONSE
SLOW
STABLE
FAST
MID.
RESPONSE
SLOW

A&D AD-8923-BCD Specifications

General

Brand	A&D
Model	AD-8923-BCD
Category	Remote Control
Language	English