A&D AD-8923-BCD - Page 23

23
Table 2 Applicable weighing instruments and key operations
Weighing instrument
AD-8923-BCD key
ON:OFF
CAL
SAMPLE
PRINT
MODE
RE-ZERO
AD-4212C, AD-4212F
Turns the
weighing
instrument
display on
or off.
*1
Performs
sensitivity
adjustment
using the
external
weight.
*4
Switches
the minimum
display.
*2
When
setting,
decide the
operation.
Switches
the response
characteristic.
Sets the
display to
zero.
AD-4212D
Performs
sensitivity
adjustment
using the
internal
weight.
GX, GX-A, GX-M,
GX-L, GX-K, GP, GH,
FZ, MC, BM, HR-AZ
Switches
the unit
displayed.
*3
GR
GF, GF-A, GF-M,
GF-L, GF-K,
AD4212A/B, HR-i,
FX, HR-A

EJ, EK-i, EW-i, EK-L,
FG-L, FG-M, FS-i,
SW, HV-G, HV-W P,
HW-G, HW-WP,
HV-C, HV-C P, HW-C,
HW-CP
*5
Note : "" in the table indicates that the key operation is not available.
*1 : Switching the standby or weighing mode is available for the AD-4212C/D/F.
*2 : Not available for the counting mode or percent mode.
*3 : Not available for the AD-4212A/B.
*4 : For weighing instruments other than AD-4212C/D/F, t he AD-8923-BCD displays “ ”.
Use the display on the balance.
*5 : Do not operate by using the key on the AD-8923-BCD.