A&D GF-2002A - Percent Mode (%) for Target Weighing

GX-A Series/GF-A Series Communication Manual 26 / 41
Example of the
CAL command （GX-A Series）Calibration with built-in weight）
□ For an example of the CAL command for the GF-A series, see the example of the EXC command.
Example of error code output of the R command (re-zero)
PC side
A
CAL command
L CR LF
Balance side
AK CR LF
Before execution
Command received
Executing（processing）
AK CR LF
Command completed
Zero display
Time
C
PC side
C
R command
R CR LF
Balance
AK CR LF
Before execution
Command received
Waiting for re-zero stability
（processing）, time up due
to instability
E CR LF
Error code output
Zero display
Time
C , E 1 1
Error display
A
CAL command
L CR LF
Or stand by for 5 seconds