A&D GF-2002A - Correcting Internal Mass (Manual Method)

GX-A Series/GF-A Series Communication Manual 39 / 41
Classification
item
Setting item Setting
value
Contents, usage
■
No used
Stores unit mass
Data memory function
Stores weighing data,
and calibration data
Every measurement
■
Every 2 seconds
Every 5 seconds
Every 10 seconds
Every 30 seconds
Every 1 minute
Every 2 minutes
Every 5 minutes
Interval time
Every 10 minutes
Used when outputting
with intervals set in
■
Do not output
Data number output
Output
Refer to "7-4. Other
data formats"
■
Do not output
Output time
Output date
Time/Date output
Output date and time
Refer to "7-4. Other
data formats"
■
Do not output
ID number output
Output
Refer to "7-4. Other
data formats"
■
Off
Data output pause
1.6-second pause
Select interval before
data output
■
Off
Auto feed
Leave one line open
Select line feed (paper
feed) after data output
■
Do not output
GLP output
Output
■
Off
Auto re-zero
On
Select re-zero after
data output
■
Off
Data output
（Cont.）
UFC function
On
Refer to "10. The UFC
function"
□ “■” Factory setting.