A&D GX-2000 - Page 54

92 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

52

Calibration report using an external weight

When the setting is “info 1”: When the setting is “info 2”:

Calibration test report using an external weight

(Calibration test does not perform calibration.)

When the setting is “info 1”: When the setting is “info 2”:

Table of Contents

Default Chapter3
- Table of Contents3
Basic Operation5
- Features5
- Compliance6
1 Introduction5
- About this Manual5
2 Unpacking the Balance8
- Unpacking8
- Installing the Balance9
3 Precautions10
- Before Use10
- During Use11
- After Use12
- Power Supply12
4 Display Symbols and Key Operation13
5 Weighing Units14
- Units14
- Storing Units17
6 Weighing19
- Basic Operation (Gram Mode)19
- Counting Mode (PC)20
- Percent Mode (Pct)22
- Animal Weighing Mode (Hold Function)23
7 Response Adjustment / Self Check Function24
- Automatic Response Adjustment / Self Check Function24
- Manual Response Adjustment25
8 Calibration26
- Calibration Group26
- Automatic Self Calibration (Calibration Due to Changes in Temperature)27
- Calibration Using the Internal Mass (One-Touch Calibration)27
- Calibration Using an External Weight28
- Calibration Test Using an External Weight30
- Correcting the Internal Mass Value32
9 Function Switch and Initialization34
- Permit or Inhibit34
- Initializing the Balance35
10 Function Table36
- Structure and Sequence of the Function Table36
- Display and Keys36
- Details of the Function Table37
- Description of the Class "Environment, Display40
- Description of the Item "Data Output Mode42
- Description of the Item "Data Format43
- Description of the Data Format Added to the Weighing Data45
- Data Format Examples46
- Clock and Calendar Function48
- Comparator Function50
11 ID Number and Glp Report52
- Setting the ID Number52
- GLP Report53
12 Data Memory56
- Notes on Using Data Memory56
- Memory for Weighing Data57
- Memory for Calibration and Calibration Test Data60
- Memory for Unit Mass in the Counting Mode61
13 Underhook62
14 Programmable-Unit63
15 Density Measurement64
16 Rs-232C Serial Interface / External Input67
17 Connection to Peripheral Equipment69
- Connection to the AD-8121B Printer69
- Connection to a Computer69
- Using Windows Communication Tools (Winct)70
18 Commands72
- Command List72
- Acknowledge Code and Error Codes73
- Command Example74
- Control Using CTS and RTS78
- Settings Related to RS-232C78
19 Maintenance79
20 Troubleshooting79
- Checking the Balance Performance and Environment79
- Error Codes80
- Asking for Repair83
21 Specifications84
22 Options86
23 External Dimensions89
24 Terms/Index90

Other manuals for A&D GX-2000

Maintenance Manual98 pages

Related product manuals

Preview: A&D GX-200

Preview: A&D GX-203A

Preview: A&D GX-300

A&D GX-A Series