A&D GX-2000 - Page 7

92 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

5

Table of Contents

Default Chapter3
- Table of Contents3
Basic Operation5
- Features5
- Compliance6
1 Introduction5
- About this Manual5
2 Unpacking the Balance8
- Unpacking8
- Installing the Balance9
3 Precautions10
- Before Use10
- During Use11
- After Use12
- Power Supply12
4 Display Symbols and Key Operation13
5 Weighing Units14
- Units14
- Storing Units17
6 Weighing19
- Basic Operation (Gram Mode)19
- Counting Mode (PC)20
- Percent Mode (Pct)22
- Animal Weighing Mode (Hold Function)23
7 Response Adjustment / Self Check Function24
- Automatic Response Adjustment / Self Check Function24
- Manual Response Adjustment25
8 Calibration26
- Calibration Group26
- Automatic Self Calibration (Calibration Due to Changes in Temperature)27
- Calibration Using the Internal Mass (One-Touch Calibration)27
- Calibration Using an External Weight28
- Calibration Test Using an External Weight30
- Correcting the Internal Mass Value32
9 Function Switch and Initialization34
- Permit or Inhibit34
- Initializing the Balance35
10 Function Table36
- Structure and Sequence of the Function Table36
- Display and Keys36
- Details of the Function Table37
- Description of the Class "Environment, Display40
- Description of the Item "Data Output Mode42
- Description of the Item "Data Format43
- Description of the Data Format Added to the Weighing Data45
- Data Format Examples46
- Clock and Calendar Function48
- Comparator Function50
11 ID Number and Glp Report52
- Setting the ID Number52
- GLP Report53
12 Data Memory56
- Notes on Using Data Memory56
- Memory for Weighing Data57
- Memory for Calibration and Calibration Test Data60
- Memory for Unit Mass in the Counting Mode61
13 Underhook62
14 Programmable-Unit63
15 Density Measurement64
16 Rs-232C Serial Interface / External Input67
17 Connection to Peripheral Equipment69
- Connection to the AD-8121B Printer69
- Connection to a Computer69
- Using Windows Communication Tools (Winct)70
18 Commands72
- Command List72
- Acknowledge Code and Error Codes73
- Command Example74
- Control Using CTS and RTS78
- Settings Related to RS-232C78
19 Maintenance79
20 Troubleshooting79
- Checking the Balance Performance and Environment79
- Error Codes80
- Asking for Repair83
21 Specifications84
22 Options86
23 External Dimensions89
24 Terms/Index90

Other manuals for A&D GX-2000

Maintenance Manual98 pages

Related product manuals

Preview: A&D GX-200

Preview: A&D GX-203A

Preview: A&D GX-300

A&D GX-A Series