A&D HC-3Ki - Page 35

33
F-03-X M+ Accumulation Function
 M+ Accumulation – Automatic or manual
03
Manual accumulation (by pressing the M+ key).
1
Automatic accumulation (Positive data only).
 + or – Count Data Acceptable. (Manual Accumulation)
03
Positive data only (5d and above).
1
Positive and negative data (5d and above or –5d or below).
F-04-X Environment and Beeper
 Zero Tracking.
Zero tracking traces a drift from zero caused by temperature
change etc., and stabilizes the zero point.
03
Zero tracking ON.
1
Zero tracking OFF.
 Response
0
Fast / sensitive
13
Normal
2
Slow / stable
3
Slower / stabler
 Stable Detection Speed / Environment
0
Fast stable detection (good environment).
13
Normal.
2
Slow stable detection (poor environment).
 Beeper for key operation
03
Beeper ON.
1
Beeper OFF.
f-03-01
f-03-02
f-04-01
f-04-03
+5d
M+
Not Accepted
f-03-02=0
+
0
-
+5d
-5d
M+
Not Accepted
f-03-02=1
+
0
-
f-04-02
f-04-04