77
10-5
Controlling the measurement using a personal computer
(In case of the graphing software“RsVisco”)
1 Refer to “6. MEASUREMENT”, prepare the measurement.
2 Start the graphing software“RsVisco”.
3 Confirm that the COM port of the“RsVisco” is set properly.
4 Click the START button of the“RsVisco” to start the measurement.
5 If you want to finish the measurement, click the START button of the“RsVisco”.
* For details on how to use the software, refer to the file “Readme” that is installed in a personal
computer after the CD-ROM set up.
To Next Page
