92
AX-SV-38 Glass Storage Container
• Used to store sample fluids.
The viscosity of the sample stored in the container
can be measured as it is.
- The AX-SV-38 consists of :
Glass storage container (Capacity: Approx.50 mL) 10 pcs
(Borosilicate glass, Operating temperature: 180°C max.)
Lid 10 pcs
(Polyethylene, Operating temperature: 80°C max.)
AX-SV-39 Plastic Storage Container
• Used to store sample fluids.
The viscosity of the sample stored in the container
can be measured as it is.
- The AX-SV-39 consists of :
Plastic storage container (Capacity: Approx.120 mL) 20 pcs
(Polypropylene, Operating temperature: 80°C max.)
Lid 20 pcs
(Polyethylene, Operating temperature: 80°C max.)
AX-SV-51 Stand Set
• Used for securing the sensor unit while measuring the
viscosity of a sample.
- Consists of :
Stand for securing the sensor unit 1 pc
X-Y-Z stage 1 pc
• Used when a small amount of sample (2 mL) will be
measured. (Only for SV-1A/SV-1H)
- Consists of :
Sample cup (Capacity: 2 mL) 1 pc
Sample cup holder 1 pc
Sample cup (Capacity: 45 mL) 1 pc
(Polycarbonate, Operating temperature: 120°C max.)
Lid 1 pc
(Polypropylene, Operating temperature: 80°C max.)
Plastic storage container
Lid
X-Y-Z stage
Sample cup
holder
Sample cup
Sample cup
(Lid attached)
Stand for securing the sensor unit
To Next Page
Loading...
