A&D SV-1A - Page 98

96
AX-SV-56-1 Sample Cup Holder (For 2 mL capacity, Transparent)
AX-SV-56-2 Sample Cup Holder (For 2 mL capacity, Black)
• Used for securing a 2mL sample cup while measuring.
(Only for SV-1A/SV-1H)
- Consists of :
Sample cup holder 5 pcs
Sample cup (45 mL) 5 pcs
(All: Polycarbonate, Operating temperature: 120°C max.)
AX-SV-57 Sample Cup Stand (For 2 mL capacity)
• Used for support when 2mL sample cups are used.
(Only for SV-1A/SV-1H)
- Consists of :
Sample cup stand 2 pcs
AX-SV-58 Sample Cup (2 mL)
• Sample cup set (Only for SV-1A/SV-1H)
Used when a small amount of sample (2 mL) will be
measured.
- Consists of :
Sample cup (2 mL) 100 pcs
(Polycarbonate, Operating temperature: 120°C max.)
Lid 100 pcs
(Polypropylene, Operating temperature: 80°C max.)
AX-SV-59 Glass Sample Cup (2 mL)
• Glass sample cup and Sample cup stand set (Only
for SV-1A/SV-1H)
Used when a small amount of sample (2 mL) will be
measured. Used for support of 2 mL sample cups.
- Consists of :
Glass sample cup (Capacity: 2 mL) 5 pcs
(Pyrex® glass, Operating temperature: 230°C max.)
Sample cup stand 1 pc
Sample cup holder
Sample cup
stand
Sample cup
stand
Glass sample
cup
Sample cup
(Lid attached)