A&S Hurricane-S - About the Discs

10
Random Playback
• Press the SHUFFLE button on the remote control to switch the randomly play the song ON/OFF.
- SHUFFLE : Randomly play the song. “ ” lights up.
- SHUF OFF: Randomly turned o.
Select repeat play options
Press the REPEAT button repeatedly on the remote control to select repeat play modes. The selected
mode will show on the display.
- RPT ONE: Repeat current track. “ ” blinks.
- RPT ALB: Repeat the track in the folder (if a folder is displayed). “ “ blinks.
- RPT ALL: Repeat all tracks. “ “ lights up.
- RPT OFF: Repeat turned o.
Repeat A-B (CD/MP3)
1 During music or video play, press the A-B button at the start point.
2 Press the A-B button at the end point.
• The selected section starts to play repeatedly.
• To cancel repeat play, press the A-B button again.
Note: The section A and B can be set only within the same track/title.
Programme Setting
The user can programme up to 20 tracks in CD/USB mode in any desired order. Programme mode is
activated while in STOP mode .
1. Press the
L
button on the remote control or on the unit.
2. Press the PROG button on the remote control or on the unit to enter MEMORY mode.
3. Press the number (0~9) buttons or I

/

I buttons on the remote control or on the unit to select the
track that you want to preset, then press PROG button to conrm.
4. Repeat step 3 to programme more tracks.
5. Press the
BF
button to playback programme tracks.
Note:
- If you want to change the programed les, press the
L
button two times to clear the current program les,
display shows "PRG CLR" , then repeat the program steps as above to re-enter the new program les.
- Or opening the CD door to clear the current program les.
About the Discs
Do not move the unit during playback
- During playback, the disc rotates at high speed.
- Do not lift or move the unit during playback, as doing so may damage the disc or the unit.
When moving this unit
- When changing places of installation or packing the unit for moving, be sure to remove the disc and
return the disc tray to its closed position in the player. Then, press the power switch to turn the power
o before disconnecting the power cord. Moving this unit with the disc loaded may result in damage
to this unit.