AAON V3-E - General Information; Unit Overview and Certifications

17
General Information
AAON
®
V3 Series indoor air handling units
have been designed for indoor installation
only. Units are assembled, wired, charged
with dry nitrogen and run-tested at the
factory. V3 Series units are not intended for
residential use. Startup and service must be
performed by a Factory Trained Service
Technician.
Certification of Gas Heat Models
a. Certified as a Category IV forced air
furnace with or without cooling.
b. Certified for indoor installation.
Certification of Steam or Hot Water Heat
Models
a. Certified as a forced air heating system
with or without cooling.
b. Certified for indoor installation only.
Certification of Electric Heat Models
a. Certified as an electric warm air furnace
with or without cooling.
b. Certified for indoor installation only.
Certification of Cooling Models
a. Certified as a commercial central air
conditioner with or without electrically
operated compressors.
b. Certified for indoor installation only.
c. Certified with refrigerant R-410A coils or
with chilled water cooling coils.
Improper installation, adjustment,
alteration, service or maintenance can
cause property damage, personal
injury or loss of life. Startup and
service must be performed by a
Factory Trained Service Technician. A
copy of this IOM should be kept with
the unit.
WARNING
These units must not be used for
heating or cooling at any time during
any phase of construction. Very low
return air temperatures, harmful
vapors, and misplacement of the
filters will damage the unit and its
efficiency.
CAUTION
This equipment is protected by a
standard limited warranty under the
condition that initial installation,
service, startup and maintenance is
performed according to the
instructions set forth in this manual.
This manual should be read in its
entirety prior to installation and before
performing any service or
maintenance work.
Equipment described in this manual is
available with many optional
accessories. If you have questions
after reading this manual in its
entirety, consult other factory
documentation or contact your AAON
Sales Representative to obtain further
information before manipulating this
equipment or its optional accessories
CAUTION