Aastra 6700i Series - Limitations; Behaviors; TR-069 Parameter

TR-069 Protocol Support
41-001373-01 REV02 – 05.2014 3
Limitations
The following is a list of limitations with TR-069:
• TR-111 Part 1 is not supported (only Part 2 - STUN)
• The current release does not support Aastra CT models
• The current release does not have support for the following RPC function calls:
– AddObject
– DeleteObject
– GetQueuedTransfers
– GetAllQueuedTransfers
– ScheduleInform
– SetVouchers
– GetOptions
• Inform Retry Policy with increasing intervals is not supported (only constant intervals are supported)
• Active Notification is supported only for limited list of parameters
• A subset of Aastra configuration parameters are supported through TR-069
• Only a TR-069 active session is supported (single IP address)
• CPE Identification is made based on OUI + Product Class + MAC (not serial number)
• Each Voice Profile has only 1 line
• VoiceService.X_Aastra_GlobalVoiceProfile corresponds to Aastra Sip Global Settings and has only 1 line object
• VoiceService.1.VoiceProfile.{1} corresponds to Aastra SIP settings per line i and has only 1 line object
• Constant number of lines mapped to the number of Voice Profile (profile remove is not supported)
Behaviors
The following is a list of behaviors with TR-069:
• Web and TUI are still available for configuration and can override what was done through TR-069
• The phones will notify ACS though the Active notification process for a limited subset of parameters (as defined)
• Loading of new configuration through TR-069 will require a CPE reboot
TR-069 Parameter Descriptions
An Administrator can enable/disable and configure the TR-069 protocol using the following parameters in the configura-
tion files:
• tr69
• tr69 server
• tr69 server port
• tr69 server path
• tr69 username
• tr69 password
• tr69 connection request path
• tr69 connection request port