Model 6731i IP Phone User Guide 101
Line Keys and Programmable Keys
None Key
You can set a key to force a blank entry on the IP phone display for a specific key. You do this by
setting the key to "none". If a particular key is not defined, it is ignored.
Setting a None Key
Use the following procedure to configure a None key on the 6731i IP Phone.
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your
system administrator.)
3. In the "Type" field, select None.
4. Click to save your changes.
Aastra Web UI
Note: Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.
To Next Page
Loading...
