Model 6751i IP Phone User Guide 103
Additional Features
Keys States and LED Behavior
There are two call states on the phones that support SCA bridging:
• Bridge-active - A bridged call is in progress
• Bridge-held - The 3rd-party (i.e., non-SCA party) in the bridge is on hold.
The following tables provide the key states and LED behavior in an SCA bridge call for users
involved in an SCA call and users not involved in the SCA call.
Idle Screen
Line key Phone Behavior
State Call LED Call Caller ID Non-Call LED Non-Call Caller ID
Idle N/A N/A Off N/A
Seized Solid Green None Solid Red None
Progressing (outgoing call) Green Called Part7 Solid Red None
Alerting (incoming call) Blinking Unselected Red N/A
Active Solid Green Far-end Solid Red Far-end
Held Slow Flashing Green Far-end Slow Flashing Red Far-end
Hold private Slow Flashing Green Far-end Solid Red Far-end
Bridge-active Solid Green Far-end Solid Red Far-end
Bridge-held Slow Flashing Green Far-end Solid Red Far-end
State Call Line Key Pressed Non-Call Line Key Pressed
Idle N/A Attempt to seize the line
Seized Hang up Ignore
Progressing Hang up Ignore
Alerting answer N/A
Active Hold Bridge
Held Retrieve Bridge
Hold private Retrieve Ignore
Bridge-active Hold Bridge
Bridge-held Retrieve Bridge
To Next Page
Loading...
