Model 6751i IP Phone User Guide 55
Handling Calls
Handling Calls
When you are connected to a call, you can use the Hold key , the Transfer Key (UP Arrow),
or the Conference Key (DOWN Arrow) on the phone to place a call on hold, transfer a call, or
conference.
Placing a Call on Hold
You can place an active call on hold by pressing the Hold Key. When you place a call on
hold, only your phone can retrieve the call.
When a call is on hold, the icon displays on-hook as follows.
For on-hold calls, the timer displays as running.
To place a call on hold
1. Connect to the call (if not already connected).
2. Press the Hold key.
If a call is on hold for an extended period of time, the phone beeps softly to remind you that
you still have a call on hold. The screen displays "Call Held".
IP Phone UI
Note: If you are connected to another call, the phone does not beep to remind
you that you still have a call on hold.
To Next Page
Loading...
