Model 6753i RP Phone Installation Guide 27
Model 6753i RP Expansion Module M670i
4. Connect the other end of the RJ-45 cable to the RJ-45 port on the back of
the expan-
sion mod-
ule as
indicated.
5. Turn over
both units to
sit face up
on the desk
with the
expansion
module sit-
ting flush against the right side of the phone.
Note: Install additional modules as applicable using additional RJ-45 cables. You
must attach any additional module to the right side of an existing module
(piggy-backed) as shown in the following illustration.
For more information about setting the softkeys, see the
Aastra Model 6753i RP User Guide.
To Next Page
Loading...
