114 Model 6757i IP Phone User Guide
Line Keys and Softkeys
Configuring Park /Pickup using Static Configuration
Use the following procedure to configure the Park/Pickup call feature using the static
configuration method.
1. Click on Basic Settings->Preferences->General.
2. Enter a server value in the Park Call field to which incoming live calls are parked.
3. Enter a server value in the "Pickup Parked Call" field.
4. Click to save your changes.
Note: Aastra recommends you configure either the static or the programmable
configuration, but not both.
Aastra Web UI
Note: For values to enter in this field, see the table “Park/Pickup Call Server
Configuration Values” on page 113.
Note: For values to enter in this field, see the table “Park/Pickup Call Server
Configuration Values” on page 113.
To Next Page
Loading...
