68 Model 6757i IP Phone User Guide
Line Keys and Softkeys
Configuring a Line Key
You can set a key as an additional line on the 6757i. The key acts as a line that behaves the same
as a hard line key. For more information about the behavior of line keys, see “Multiple Line and
Call Appearances” on page 59.
You use the Aastra Web UI to set a key as a line.
Use the following procedure to set a key to function as a line. The procedure shows the softkey
screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Line to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
Aastra Web UI
To Next Page
Loading...
