EasyManua.ls Logo

Aastra 6775 - Message and Phone Settings MenuCards

Aastra 6775
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features and MenuCards
109
Then select whether Internal calls, External calls or Int./ext. calls are to be for-
warded to the destination (Dest.). If you assign the “Call diversion” function to a
feature key (see also Programming Functions (Features) starting on page 129), you
can also enter a Text for a label for the key. The label is displayed in the
OpenCom 100 / Aastra 800’s Configurator for informational purposes. Activate call
forwarding with On. Activated call forwarding (Immediately, After delay, Busy) is
indicated by a “+” sign followed by the call forwarding destination. You can switch call
forwarding on or off using the plus/minus key
=.
Note
Note: All calls to your telephone’s numbers are forwarded. If a number is stored on
more than one telephone, calls made to any of the other telephones will also be for-
warded.
3DivertMSN: “Divert MSN” is available for ISDN multi-terminal accesses. You can use
this type of call forwarding to forward incoming external calls to external destinations
for each MSN. Select the MSN (one of the call numbers supplied for the multi-terminal
access) that you want to forward. Several MSNs can be grouped together (this is con-
figured by your system administrator) and forwarded to a common destination
number. Selecting the All menu item lets you forward all configured MSNs to the
same destination number.
You need the relevant authorisation to forward MSN groups and all MSNs. Only then
will the corresponding items appear in the menu. Contact your system administrator
if you have any questions about your authorisation and the current configuration of
MSN groups.
After you have selected an MSN, an MSN group or all MSNs, select the type of call for-
warding (Immediately, After delay or Busy) then enter the external destination
(Dest.).
Note
For this type of call forwarding, the (external) destination number is always entered
without the line seizure code.
If you assign “Divert MSN” to a feature key (see also Programming Functions (Fea-
tures) starting on page 129), you can also enter a Text to label the key with. The label

Table of Contents

Related product manuals