Features and MenuCards
125
MenuCard “Central Settings”
In this MenuCard you can define rules and settings for your system’s time man-
agement. You can only invoke this MenuCard if your system administrator has con-
figured the “Time control” or “Configurator - active” authorisation for your user group.
MPSelect 0 Central settings, followed by …
1Time control: Several time groups can be configured in the OpenCom 100 /
Aastra 800. Incoming calls are then signalled on different telephones depending on
the activated time group. Switching between these time groups can be done auto-
matically according to a timetable drawn up by the system administrator, or it can be
done manually.
You can only programme these functions if the system administrator has activated
the “Time control” authorisation for your user group.
Select the Automatic item to activate automatic time control. The configured time
groups then change automatically according to the timetable configured by the
system administrator. This setting remains active until one of the available time
groups is set manually.
The system administrator can configure up to ten time groups. The time groups are
either numbered (default setting) or named by the system administrator. You can
select a specific time group manually, which deactivates the automatic time control.
Note
“MSN” forwarding always remains in effect, regardless of the currently active time
group.
2Date/Time: The date and time are taken from the exchange with the first external
outgoing call. If your network operator does not transmit this information, you can set
the date and time here yourself.
You can only programme these functions if the system administrator has activated
the “Configurator - active” authorisation for your user group.
Select the required entry (time with hh:mm, date with dd.mm.yy) and press
O.
Overwrite the current setting, confirm the new setting with
O and Save your set-
tings.
To Next Page
Loading...
