Telephoning
68
On a Different Call Key
Note
The system administrator can switch off the notification tone for a call on another
call key in the web configurator with the Beep for calls in call queue option (menu:
Telephony: Devices: System phones).
VIP Call
MenuCard “Call Waiting”
MYou hear the call waiting tone. Briefly press the MenuCard key, then select the
following from the Call Waiting MenuCard …
Accept: You accept the waiting call. The person you were talking to before is put on
hold.
Reject: The caller hears a busy tone.
Deflect: You do not accept the waiting call, but deflect it to another subscriber after
entering this subscriber’s call number as the destination (Dest.). You can only use the
“Deflect call” function if your user group is authorised to forward calls to internal and/
or external destinations.
G You are conducting a call, hear a notification tone (default) and
see the call on the display.
g Press the flashing call key. This puts your first call on hold and
connects you to the new caller.
T Press the disconnect key to end the current call.
g Then press the call key of the held subscriber. (The LED of the
call key flashes and the arrow symbol is displayed.)
G You are now reconnected to the first subscriber.
g You hear the call waiting tone. During a call, press the call key
that signals the call.
To Next Page
Loading...
