Aastra 6775 - Stacking or Linking Functions

Features and MenuCards
131
Changing a Programmed Feature Key
Deleting a Programmed Feature Key
Stacking or Linking Functions
You can also save multiple functions to a single feature key (stack or link functions).
• Stack: The functions stored in a stack are displayed in a MenuCard which is
assigned to a key. You can save destination numbers as well as functions in a stack
and select the desired destination number or function from this MenuCard.
• Link: Linked functions are executed consecutively after the relevant key is pressed.
This makes it possible to combine complex system telephone settings on a single
feature key. You can programme more functions in a link than you can on a single
feature key. A concrete setting for a function can be saved in a link (e.g on/off for
“call protection” or a concrete display language). This means that a function in a
link has an exactly defined switching function in comparison with the functioning
of a single feature key. Destination numbers can not be saved in a link.
A stack and a link have five free memory locations each.
g Long press the programmed key, then …
Z/ P change the programmed function (e. g. the call number of a call
forwarding) or select another function.
O Confirm by pressing the OK key.
O The Save menu item is now selected. Press the OK key. The pro-
gramming is saved.
g Long press the programmed key, then …
P select Delete key .
O Press the OK key.