Telephoning
55
Note
Display of the question mark “?” is the system default. The system administrator can
switch off this default setting in the web configurator with the Mark unchecked
phone number with ? option (Telephony: Settings menu).
“CNIP” Feature
“CNIP” is an abbreviation for “Calling Name ^Identification Presentation”. In addition
to the call number, the name configured by the caller is also transmitted and dis-
played on the corresponding call key. This assumes that the network provider
transmits this information with the connection. If the caller's number is listed in the
OpenCom 100 / Aastra 800 telephone book, this local entry is displayed in preference.
“CLIR” Feature
“CLIR” is an abbreviation for “Calling Line Identification Restriction”. Before dialling a
call number, you can decide from case to case if you wish to prevent your call number
from being displayed to the called subscriber. To do this, select Suppress number
from one of the MenuCards described in the next section. If this feature is not pro-
vided, your call number will always or never be displayed, depending on the system
setting. Consult your system administrator for more information.
To Next Page
Loading...
