Additional Features
41-001523-00 REV00 – 04.2014 147
Configuring Preferred Line and Preferred Line Timeout Using the Aastra Web UI
Aastra Web UI
1. Click on Basic Settings > Preferences > General.
2. In the Preferred Line field, select a preferred line to switch focus to after incoming or outgoing calls end on the phone.
Default is 1. Valid values are:
• None (disables the preferred line focus feature)
• 1 through 9
For example, if you set the preferred line to 1, when a call (incoming or outgoing) ends on the phone (on any line),
the phone switches focus back to Line 1.
3. In the Preferred Line Timeout field, enter the amount of time, in seconds, that the phone switches back to the
preferred line after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line.
Default is 0.
Valid values are: 0 to 999
4. Click Save Settings.
To Next Page
Loading...
