Line Keys and Programmable Keys
64 41-001523-00 REV00 – 04.2014
Sprecode Key
You can set a programmable key to automatically activate specific services offered by the server. For example, if the spre-
code value of *82 is configured, then by pressing the Sprecode key, *82 automatically activates a service provided by the
server. Contact your System Administrator for information about available services.
Configuring a Sprecode Key
Aastra Web UI
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Sprecode.
4. In the Value field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
5. Click Save Settings.
Expansion Module Keys
6. Select from Key 1 through Key 16.
7. In the Type field, select Sprecode.
8. In the Value field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
9. Click Save Settings.
To Next Page
Loading...
