Line Keys and Programmable Keys
41-001523-00 REV00 – 04.2014 49
Creating a Speed Dial Using a Programmable Key in the Aastra Web UI
Aastra Web UI
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Speeddial to apply to the key.
4. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this hard key. If you enter a
speed dial prefix, you must enter the + character at the end of the prefix number (for example, 123456+).
5. In the Line field, select a line for which to apply the speed dial to. Valid values are 1 through 9.
6. Click Save Settings.
Expansion Module Keys
7. Select from Key 1 through Key 16.
8. In the Type field, select Speeddial to apply to the key.
9. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this key. If you enter a speed
dial prefix, you must enter the + character at the end of the prefix number (for example, 123456+).
10. In the Line field, select a line to apply to this key. Valid values are 1 through 9.
11. Click Save Settings.
To Next Page
Loading...
