Outgoing Calls
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 321224
Automatic Callback
You call an extension and receive busy tone or get no answer.
5 Press.
Verification tone.
Note: The number for Automatic Callback may differ from
country to country.
d or í Replace the handset or press to finish the procedure.
You are called back if the extension finishes the ongoing call or the
next time the extension finishes a new call. You have to answer
within eight seconds otherwise the Callback service is cancelled.
u Lift the handset when you are called back.
(You can also press the Line or Loudspeaker key to answer in
handsfree mode.)
Automatic Redial
If you call an external number and receive busy tone or get no
answer, you can instruct the system to automatically redial the
number until it is available.
Note: This feature could be restricted. Ask the system
administrator for the availability.
This function is activated via Function keys, so you first have to
program a programmable key (one key required per number). See
section “Program a function” on page 89. You can activate
Automatic Redial on up to four external numbers at the same time.
Activate
During the call:
Ô Press to activate (pre-programmed).
The Automatic Redial lamp is rapidly flashing and is lit when the
request is stored and activated. Verification tone.
d or í Replace the handset or press to finish the procedure.
You are called back if the called number finishes the ongoing call or
the next time the extension finishes a new call. On the Dialog 4222
Office and the Dialog 3212 Standard the display shows:
To Next Page
Loading...
Need help?
General