Settings
Dialog 4220 Lite/Dialog 4222 Office70
Programming of ring signal tone character
There are 10 different programmable ring signal tone characters on
your phone, each corresponding to a digit between 0 and 9.
Note: If you use melodies to signal incoming calls (4222
Office phone only), this will replace the tone character. See
section “Melody Ringing” on page 73.
Ô Program Press.
On the 4222 Office phone, the current tone character is displayed.
( 0— 9) Press the corresponding digit.
The phone rings with the chosen tone character.
ÕÔ Program Press to finish programming.
To Next Page
Loading...
