65Dialog 4220 Lite/Dialog 4222 Office
Settings
Settings
Programming of function keys
Frequently used features and phone numbers can be programmed
on the function keys for easy access. When you want to use the
feature, just press the key. Certain features must be
preprogrammed by your system administrator. Both phone
numbers and feature codes can be programmed on a function key.
Program or change a feature
Ô Program Press.
Ô Press the selected function key.
Note: If the key is already programmed, the number or
feature will be displayed.
z Enter phone number or a feature code according to the list in
section “Features and required data”.
Note: If a wrong number is entered, press the Clear key to
erase it, and then enter the correct number.
ÕÔ Press the function key again.
ÕÔ Program Press to finish programming.
Remove the transparent cover and write the feature name or phone
number beside the key.
To Next Page
Loading...
