During Calls
Dialog 4220 Lite/Dialog 4222 Office36
Conference
With this procedure you can include up to seven parties in a
conference. Only the conference leader (i.e. the person initiating the
conference) can admit participants. During the conference a tone
will be heard every 15 seconds.
Note: The conference tone might be disabled for your
system.
You have an ongoing conversation (Line 1) and want to establish a
phone conference. You will become the conference leader.
Ô Inquiry Press.
Note: You can also press Line 2 or Inquiry.
z Call the third party.
Wait for answer.
3 Press to establish a conference.
Note: You can also press: Conference (The function key is
programmed by you).
Repeat the procedure to add more conference members.
d Replace the handset to leave the conference.
Note: A tone is heard each time a participant enters or
leaves the conference. When the conference leader leaves
the conference, the conference will continue with the other
included parties. The conversation is changed back to a
normal two party connection when there are only two
parties left.
To Next Page
Loading...
